KILONEWTONS ENGINEERING WORLDWIDE SERVICES
Engineering Services
KILONEWTONS Engineering Services performs independent design review of an engineered system, equipment or process to check their compliance to relevant quality, operation, safety, environmental and industry standards.
Core Services
Pre-Tender Scheme, Design & Estimation
Conceptual Design, Detail Analysis,
Rectification to existing faulty structures & Trouble-Shooting
Shop Drawings, Erection Drawings, As built Drawings.
Types of Structures
Substructures, Superstructures, Shear walls, Pre-Engineered Buildings, Reinforced concrete and Load-bearing structures, Truss and Pre-engineered structures, Frames, Tensile and Composite structures.
KILONEWTONS Provides….
Detailed engineering.
Pressure vessel calculations.
Repair & alteration calculations.
Piping & pipeline design analysis.
Structural design & analysis.
Process engineering.
Detailed design review.
Finite Element Analysis (FEA).
Welding Engineering ( WPS & PQR).
KILONEWTONS Provides….
Construction drawing review and verification.
Review of project specification and construction procedures.
Welding Procedure/Welder Qualification.
Material Control Inspection.
Site Inspection/Supervision.
Daily/weekly/Monthly reporting.
Arranging progress meeting.
Review of baseline schedule.
Total Quality Document Control.
Review and recommending of site queries.
Review and recommending of technical deviations.
Conducting Internal and External Audits.
Providing technical advice to the client on various aspects all throughout the period of construction.
Final Test Pack/MDR Preparation.
Web Based Work Tracking.
Detailed Engineering….
In the Detail Engineering phase, our engineers are responsible for generating the information package that establishes the specifications to execute the project´s construction, as well as the acquisition of equipment, instruments and materials.
In this phase, KILONEWTONS carries out the following activities, according to the area:
Processes:
- Design Basis (updated from FEED)
- Process Flow Diagram (PFD)
- Heat & Mass Balance
- Piping & Instrument Diagrams (P&IDs) (Issued for Construction)
- Line List
- Equipment List (includes missing data such as vendor information)
- Final Line Sizing and Hydraulic Report based on Piping Isometrics
- Updated Operating, Control and Safeguarding Philosophy
- Commissioning Procedure & Plan
- Plant Operating Manual
Equipment
- Design Basis (support)
- General Specifications
- 3D Model General
- HVAC Equipment modeling
- Duct of HVAC modeling
- Piping of HVAC / Refrigerant modeling
- HVAC Piping supports modeling
- Multidisciplinary 3D Model review
- Post-review 3D Model comments incorporating
- Clash detection and resolution
- 3D Model customer review
- Piping and Instrumentation Diagram (support)
- Calculation Report – Tanks and Vessels
- Identification of regulatory requirements and permits
- Engineering Drawings Tanks and Vessels
- Tanks and Vessels Requisitions
- Technical Bid Evaluation – Tanks and Vessels
- Vendor Documents Review – Tanks and Vessels
- Rotary Equipment Data Sheets
- Rotary Equipment Requisitions
- Technical Bid Evaluation – Rotary Equipment
- Vendor Documents Review – Rotary Equipment
- Calculation Report – Rotary Equipment
- Heat Transfer Equipment Data Sheets
- Manufacturing Drawings Heat Transfer Equipment
- Engineering Drawings Heat Transfer Equipment
- Heat Transfer Equipment Requisition
- Technical Bid Evaluation – Heat Transfer Equipment
- Vendor Documents Review – Heat Transfer
- Calculation Report – Heat Transfer Equipment
- Solids Handling Equipment Drawings, Solids Handling Equipment Data Sheets, Solids Handling Equipment Requisition
- Technical Bid Evaluation – Solids Handling Equipment
- Vendor Documents Review – Solids Handling Equipment
- Calculation Report – Solids Handling Equipment
- Air Conditioning and Ventilation Equipment Plot Plan
- One Line Drawings of Ducts of Air Conditioning and ventilation
- Detail Drawings of Ducts of Air Conditioning and Ventilation
- Air Conditioning and Ventilation Standards, Air Conditioning and Ventilation Equipment Data Sheets
- Air Conditioning and Ventilation Equipment Requisition
- Drawing of ducts, piping and instrumentation – Air Conditioning and Ventilation Equipment
- Technical Bid Evaluation – Air Conditioning and Ventilation Equipment
- Chilled water / refrigerant piping drawings
- Chilled water / refrigerant piping Isometrics
- Vendor Documents Review – Air Conditioning and Ventilation
- Calculation Report – Air Conditioning and Ventilation Equipment
- Package Units and Miscellaneous Equipment Data Sheets
- Package Units and Miscellaneous Equipment Requisition
- Technical Bid Evaluation – Package Units and Miscellaneous Equipment
- Vendor Documents Review – Package Units and Miscellaneous Equipment
- Equipment Boiler and Furnace Equipment Data Sheets
- Boiler and Furnace Equipment Requisition
- Technical Bid Evaluation – Boiler and Furnace Equipment
- Vendor Documents Review – Boiler and Furnace equipment
Instrumentation Engineering
- Technical Review of Customer Information
- Site Survey
- Design Basis (support)
- Design Criteria (support)
- Control and Operation Criteria (support)
- Piping and Instrumentation Diagram
- Scope of Construction Work Items
- Bill of Quantities
- Material Take Off (MTO)
- Material, Systems and Equipment Requisition
- Technical Bid Evaluation
- Vendor Documents Review
- Risk and Safety Studies Specification / Follow-up
- Instrumentation Systems Specifications
- Block Diagram and / or Control Systems Architectures
- Instrumentation Index
- Field Instruments Data Sheets
- Inline Instruments Data Sheets
- Analyzers Data Sheets
- Instruments Location and Pneumatic signals routes
- Instruments Location and Electrical cable routes
- Equipment Location and Control Cables Routes in Buildings
- Detection and Alarm Devices Location and Cable routes – Exterior
- Detection and Alarm Devices Location and Cable routes – Buildings
- Main Cables Routes
- Cables / Reel List
- Signal List
- Installation Details
- Loop Diagrams
Electrical Engineering
- Initial Activities
- Coordination and Follow-up
- Site Survey
- General Specifications
- Design Criteria (support)
- Scope of Construction Work Items
- Bill of Quantities
- Material Take Off (MTO)
- Symbols (drawings/plans)
- Equipment List
- Cables List
- Materials and Equipment Requisition
- Technical Bid Evaluation
- Vendor Documents Review
- One Line Diagram
- Electrical Studies
- Calculation Report
- Feeder Calculation Report
- Lighting Calculations Report
- General Plot Plan / Equipment Plot Plan (support)
- BID Packages (support)
- Mechanical Catalog
- Commissioning and Start-up Manual (support)
- Field Engineering
- “As built” Documents (drawings/plans)
- Technical Audits
- Diagram Scheme Protections System
- Grounding System Drawings (electrical substations)
- Coordination and Setting Protections System
- Load Analysis
- Area Classification
- Electrical Equipment Data Sheets
- Grounding System
- Protection Coordination Study
- 3D Model General
- Aboveground Routing
- Underground Routing
- Cables trays ≥ 300mm width
- Multidisciplinary 3D Model review
- Post-review 3D Model comments incorporating
- Clash detection and resolution
- 3D Model customer review
Piping
- Construction specifications
- Implantation Equipment Plant
- Model 3D
- Piping Layouts, Piping isometrics
- Piping supports
- Detail Piping & Instrument Diagrams (P&IDs)- Firefighting System
- Calculation report- Firefighting System
- Material Take off
- Bill of Material
- Stress Analysis studies
- Piping requisitions
- Construction Package
- Steam Tracing Documents
- Technical Bid Evaluation
- Vendor Documents Review
Civil Engineering
- Design Basis
- Design Criteria
- Construction Specifications
- Field Information Survey
- Constructibility Study
- Foundations of structures / buildings / equipment (geometry plans, sections, details, reinforcement steel assembly tables)
- Modified topography (plant plans / sections / details)
- Roads (floor plans / longitudinal profiles / cross sections / details)
- Pavements (plant plans / details)
- Rainwater systems (plant plans / details)
- Contaminated water systems (plant plans / details)
- Drinking water distribution systems (plant plans / isometries / details)
- Wastewater collection system (plant plans / isometries / details
- Architecture (floor plans, facades, sections, restroom details, windows, doors, finishes)
- Concrete Structures (formwork plans / reinforcement steel assembly tables / anchors / details)
- Steel structures (floor plans and elevations / connection details)
- Metric calculations
- Materiales List
- Calculation Memories
- Cost Estimation Support
- Tender Package Support
- Development of 3D Models
“Indeed among the believers with the most complete faiths is the one who is the best in conducts and the most kind to his family” – The Prophet Muhammad PBUH